TM 9-2350-287-20-1
7-33. LEFT TAlLLAMP ASSEMBLY REPAIR (continued).
2.
Remove five screws (12) and spacers (10) and cover plate (11) from hull.
3.
Disconnect three electrical leads (13) from wiring harness (14).
4.
Remove two screws (8), washers (6), and Iockwashers (7) from taillamp assembly (5). Discard Iockwashers.
5.
b.
Remove taillamp
DISASSEMBLY
assembly (5), grommet (9), and three electrical leads (13) from hull.
1.
Loosen six screws (15) with retaining rings (16) from taillamp assembly (5).
2.
Remove door (21) and gasket (17) from taillamp assembly (5). Discard gasket.
3.
Push in two lamps (19 and 20) and remove from taillamp assembly (5) by turning counterclockwise.
4.
Push in light-emitting diode (LED) (18) with screwdriver, turn counterclockwise, and
assembly (5).
remove from taillamp
7-95
