7-13. INTAKE FUEL PUMP SYSTEM RELAY REPLACEMENT

FOLLOW-ON MAINTENANCE - TM-9-2350-287-20-1_737

7-14. VENTILATION BLOWER RELAY REPLACEMENT

TM-9-2350-287-20-1 Carrier Ammunition Tracked M992A21 (2350-01-352-3021) EIC:AE6 Manual
Page Navigation
710

TM 9-2350-287-20-1 7-13. INTAKE FUEL PUMP SYSTEM RELAY REPLACEMENT. This Task Covers: a. Removal b. Installation Initial Setup: Tools/Test Equipment: Battery ground leads disconnected General mechanic's tool kit (Item 24, (para 7-41). Appendix I) Driver's portable instrument panel removed (para 7-6). Equipment Conditions: Vehicle parked on level ground (refer to TM 9-2350-287-10). a. REMOVAL 1. Disconnect connector(5) from intake fuel pump system relay (4). 2. Remove three nuts, (3) washer (2), relay (4), and bracket (6) from three mounts (1). 3. Remove three mounts (1) from driver's compartment wall. b. INSTALLATION 1. Install three mounts (1) on driver's compartment wall. 2. Install bracket (6) and relay (4) on three mounts (1) with washer (2) and three nuts (3). 3. Connect connector (5) to relay (4). FOLLOW-ON MAINTENANCE: Install driver's portable instrument panel (para 7-6). Connect battery ground cables (para 7-41). Change 1 7-40

Privacy Statement
Press Release
Contact