TM 9-2350-287-20-1
6-8. RADIATOR SHROUD REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
TooI/Test Equipment:
Equipment Conditions:
General mechanic’s tool kit
Vehicle parked on level ground (refer to
(Item 24, Appendix I)
TM 9-2350-287-10).
Powerpack removed (para 3-2).
Materials/Parts:
Radiator removed from powerpack
LockWasher (7) (Item 163, Appendix H)
(para 6-6).
Lockwasher (29) (Item 175, Appendix H)
Self-locking nut (3) (Item 330, Appendix H)
a.
1.
2.
3.
4.
5.
6.
7.
b.
1.
2.
3.
4.
5.
REMOVAL
Remove 11 screws (12), Iockwashers (13), and washers (14) from inside of radiator shroud (5). Discard
Iockwashers.
Remove seven screws (22) and Iockwashers (21) and retainer (20) from radiator shroud (5).
Remove three screws (23), washers (11 ), and setf-locking nuts (1 O) and plate (15) from radiator shroud (5).
Remove three screws (3), Iockwashers (2), and washers(1) and clamp (4) from radiator shroud (5). Move
aeration detector bracket (19) out of the way.
Remove 15 screws (7), Iockwashers (8), and washers (9) and two clamps (6 ) from radiator shroud (5). Discard
Iockwashers.
Depress two fan universals (16 and 17), and remove from two fan assemblies (18).
Remove radiator shroud (5) from two fan assemblies (18).
INSTALLATION
Install radiator shroud (5) on two fan assemblies (1 8).
Install two fan universals (16 and 17) on two fan assemblies (18).
Install two clamps (6) and 15 washers (9), screws (7), and new Iockwashers (8) on radiator shroud (5).
Position aeration detector bracket (19) in place, and install clamp(4) and three washers (1), new Iockwashers
(2), and screws (3) on radiator shroud (5).
Install retainer (20) and seven new Iockwashers (21 ) and screws (22) inside radiator shroud (5),
6-20
