TM 9-2350-287-20-1
6-7. AERATION DETECTOR REPLACEMENT.
This Task Covers:
a. Removal
b. Disassembly
c.
Inspection
d. Assembly
e. Installation
Initial Setup:
Tools/Test Equipment:
l General mechanic’s tool kit
(Item 24, Appendix 1)
Materials/Parts:
l Adhesive (Item 1, Appendix D)
l Sealing compound (Item 58, Appendix D)
l LockWasher (Item 164, Appendix H)
LockWasher (2) (Item 175, Appendix H)
l LockWasher (4) (Item 196, Appendix H)
Equipment Conditions:
Vehicle parked on level ground (refer to
TM 9-2350-287-10).
Air intake grille opened and secured (refer
to TM 9-2350-287-10).
Right transmission access door opened (refer
to TM 9-2350-287-10).
Pressure relief valve block mount removed
(para 6-2).
Cooling system drained (refer to TM 9-2350-287-10).
a.
1.
2.
3,
4.
5.
6.
REMOVAL
Disconnect two electrical leads, 352A and
352B (19), from aeration detector (20).
Remove screw (18), Iockwasher (17),
ground lead (16), and washer (15) from
transmission. Discard Iockwasher.
Loosen two clamps (4 and 10), and remove
two hoses (5 and 11) from aeration
detector (20).
.
,
Remove two screws (9), Iockwashers (8),
and washers (7) and bracket (14) from
vehicle. Discard Iockwashers.
Remove four screws (13), Iockwashers
(2), washers (3), and nuts (1) and aeration
detector (20) from bracket (14). Discard
Iockwashers.
Loosen two clamps (6 and 12) and remove
two hoses (5 and 11) from vehicle, if
required.
6-16
