TM 9-2350-287-20-1
4-11. AIR CLEANER BOX ASSEMBLY REPAIR.
This Task Covers:
a. Disassembly
b. Cleaning and Inspection
c. Assembly
Initial Setup:
Tools/Test Equipment:
• Seal (Item 265, Appendix H)
• General mechanic’s tool kit
• Spring pin (Item 359, Appendix H)
(Item 24, Appendix I)
Equipment Conditions:
Materials/Parts:
• Vehicle parked on level ground
• Cement adhesive (Item 3, Appendix D)
(refer to TM 9-2350-287-10).
• Drycleaning solvent (Item 28, Appendix D)
• Right projectile rack assembly moved to rear
• Rag (Item 56, Appendix D)
of vehicle (refer to TM 9-2350-287-10).
• Lockwasher (2) (Item 163, Appendix H)
• Air cleaner box assembly removed (para 4-11).
a.
DISASSEMBLY
1.
Remove spring pin (2) from hinge pin
(3). Discard spring pin.
2.
Remove hinge pin (3), two spacers (1),
and spring (4) from air cleaner box (9).
3.
Remove two screws (5), Iockwashers
(6), and washers (7) from baffle cable
connector (8) and air cleaner box (9).
Discard Iockwashers.
4.
Thread baffle cable connector (8) through
grate on air cleaner box (9).
5.
Remove baffle (10) from air cleaner box
(9).
6.
Remove seal (11) from baffle (10).
Discard seal.
4-27
