TM 9-2350-287-20-14-10. AIR CLEANER REPAIR (continued).d.1.2.3.4.5.6.e.1.2.ASSEMBLYNOTEThere are two air cleaner boxassemblies. Assembly is the same forboth unless otherwise noted. Assemblyof right air cleaner box assembly isshown.Install new access door gasket (26) and newgasket (25) on inside upper portion of aircleaner (19).Apply rubber adhesive to bulkhead surfaceand new seal (33), and install seal (33) at venton bulkhead.Install latch assembly (28) on air cleaner (19)with eight screws (27).N O T E -Shouldered stud is found on left air cleaner box. Right air cleaner box has 10 screws.Install new gasket (36) and box assembly (34) on air cleaner (19) with shouldered stud (32) and 10 screws(31), new Iockwashers (30), and washers (29).Connect baffle cable connector (35) to air cleaner clamp (37) on air cleaner (19).Install new gasket (24) on air cleaner (19).INSTALLATION•••NOTEAn assistant is required when installingair cleaners.Right air cleaner must be installed first.Both air cleaners are installed in thesame manner. Installation of right aircleaner is shown.Install air cleaner (19) and air cleaner duct (13)in vehicle.Connect pressure indicator hose (20) to adapter(21) under left side of air cleaner duct (13).4-24
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business