TM 9-2350-287-20-14-10. AIR CLEANER REPAIR (continued).10.11.12.b.1.2.Remove four screws (18), Iockwashers (17), and washers (16) from air cleaner (19). Discard Iockwashers.Remove air cleaner (19) and support.Remove air cleaner duct (13) from vehicle.DISASSEMBLYNOTEDisassembly is the same forboth air cleaners unlessotherwise noted. Disassemblyof right air cleaner is shown.Remove gasket (24) from air cleaner (19).Discard gasket.Disconnect baffle cable connector (35) fromair cleaner clamp (37) on air cleaner (19).3.4.5.6.c.NOTEShouldered stud is found on leftair cleaner. Right air cleaner hasten screws.Remove 10 screws (31), Iockwashers (30), and washers (29), shouldered stud (32), box assembly (34), andgasket (36) from air cleaner (19). Discard Iockwashers and gasket.Remove eight screws (27) and latch assembly (28) from air cleaner (19).Remove seal (33) from vent at bulkhead, Discard seal.Remove access door gasket (26) and gasket (25) from inside upper portion of air cleaner (19). Discardgaskets.CLEANING AND INSPECTIONDrycleaning solvent P-D-680 is toxic and flammable. Always wear protective gogglesand gloves, and use only in a well-ventilated area. Avoid contact with skin, eyes, andclothes, and DO NOT use near open flame or excessive heat.1.Clean all parts with drycleaning solvent and rag.2.Inspect all parts for damage. Replace any damaged parts.4-23
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business