4-9. AIR CLEANER DUCTS AND HOSES REPLACEMENT (continued).
5.
6.
7.
8.
9.
10.
11.
12.
b.
1.
2.
3.
4.
Remove two hoses (8) connecting air cleaner to duct exhaust.
Loosen four hose clamps (9) on two hoses (11 ) connecting duct exhaust to elbow (14).
Remove nut (12), washer (13), and strap (10) from air cleaner.
Remove two hoses (11) connecting duct exhaust to elbow (14).
NOTE
Left air cleaner must be removed to remove elbow duct.
Remove left air cleaner (para 4-20).
Remove hose clamp (21) and turbocharger air intake duct hose (20) from elbow duct (18).
Remove six screws (15), Iockwashers (16), and washers (17) from elbow duct (18) and bulkhead. Discard
Iockwashers.
. .
Remove elbow duct (18) through bulkhead and powerpack compartment.
INSTALLATION
Install new gasket (19) on
elbow duct (18).
Position elbow duct (18)
through bulkhead from
powerpack compartment.
Secure elbow duct (18) to
bulkhead with six screws (15),
new Iockwashers (16), and
washers (17).
Install turbocharger air intake
duct hose (20) on elbow duct
(18) with hose clamp (21).
Remove and discard gasket (19).
4-19
