TM 9-2350-287-20-1
2-22. SIMPLIFIED TEST EQUIPMENT FOR INTERNAL COMBUSTION
ENGINES (STE/ICE) (continued).
b. STE/lCE TROUBLESHOOTING - (continued).
(16) STARTER SOLENOID VOLTAGE - TEST 70.
Tools/Test Equipment:
• General mechanic’s tool kit (Item 24, Appendix I)
• STE/lCE test set (Item 65, Appendix I)
A.
1. Connect DCA cable W1 connector PI to
VTM connector J1.
2. Connect DCA cable W1 to harness 12329996
connector at DCA receptacle in driver’s com-
partment.
3. Push power switch on VTM to ON position.
4. Do confidence test 66/99 (para 2-22.a(1)).
5. Dial 60 into TEST SELECT.
6. Press and release TEST button. Message
“VEH” should be displayed on the VTM.
7. Enter the vehicle ID number 11.
8. Enter 70 into TEST SELECT, then press and
release TEST button.
9. Crank engine (refer to TM 9-2350-287-10)
while holding fuel shutoff control handle out.
10. Record test results.
Is reading on VTM at least 18 vdc?
Do test 67 (para 2-22.b(8)) and test 69
(para 2-22.b(5)) using function control 02.
If tests are good, notify Direct Support
Maintenance.
END OF TASK
2-429
