TM 9-2350-287-20-1
2-19. TROUBLESHOOTING CHART (continued).
k. TRANSMISSION AND DRIVING CONTROLS
(2) VEHICLE DOES NOT MOVE. TRANSMISSION
(continued).
DOES NOT OPERATE IN ANY SHlFT POSITION.
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
l General mechanic’s tool kit (Item 24,
Transmission
access
open
Appendix 1)
(refer to TM 9-2350-287-10).
Air intake grille opened and secured
Personnel Required: Two
(refer to TM 9-2350-287-10).
WARNING
Vehicle has no brakes when final drives
are disconnected. Failure to securely
block vehicle can cause injury to
personnel or damage to equipment.
A. 1. Remove three screws, washers, and
Iockwashers, transmission oil filter cover, and
transmission oil filter.
2. Check for clogged or damaged fitter.
Is oil fitter clogged or damaged?
B. Check transmission oil for debris (e.g., metal
shavings) or contamination.
Is transmission oil free of debris and contamination?
Notify Direct Support maintenance.
C. 1. Install transmission oil filter and cover with
three screws, washers, and new Iockwashers.
2. Check shift control linkage for disconnec-
tion or improper adjustment.
Continued on next page
2-219
Clean clogged filters or replace
damaged filters (Appendix G.)
