TM 9-2350-287-20-1
2-19. TROUBLESHOOTING CHART (continued).
1.
TRACK AND SUSPENSION (continued).
(1) VEHICLE BRAKES POORLY. Vehicle does not
stop correctly when brake is applied.
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
General mechanic’s tool kit (Item 24,
Left and right transmission access doors opened
Appendix 1)
(refer to TM 9-2350-287-10).
Personnel Required: Two
A. Inspect brake linkage for proper adjustment by
checking shaft index marks for alignment with
lever index marks.
Is brake linkage adjusted properly?
Adjust brake linkage (para 10-3). Verify
problem is solved.
B. 1. Push down on brake pedal and inspect link-
age for any free play in the pedal or linkage in the
driver’s compartment.
2. With the aid of an assistant, check to see if the
brake shaft leading out of the bulkhead is turn-
ing when the brake pedal is pushed in.
Are all driver’s compartment linkages and
components secure, and does the brake shaft turn
when brake pedal is pushed in?
Repair or replace brake pedal and linkage or
any connecting pins and botts that may be
missing or broken (para 10-4). Verify problem
is solved.
C. 1. Inspect brake control lever in the engine
compartment and make sure it is secure at the
bulkhead and the clevis assembly.
2. Inspect and ensure that the clevis, chain,
and spur gear assemblies are secure.
Continued on next page
2-224
