TM 9-2350-287-10
TRACK MAINTENANCE (continued)
WARNING
5.
6.
Track is very heavy. Keep hands and feet from beneath track
while it is being lifted.
NOTE
An assistant is needed to lift track end.
Using crowbar, lift track end (1) until it is close enough to other end of track so that two
track connecting fixtures can be installed.
Install two track connecting fixtures on track and tighten until one end connector (4) will
fit over two track link pins (6). If necessary, reposition track connecting fixtures (one at
a time) as shown.
NOTE
Track can be manuevered by lifting with crowbar or pushing
against inside of track to bow it out.
7.
Manuever track until end connector (4) can be installed over two track link pins (6) on
inside of track. Tap end connector (4) with hammer to install over two track link pins (6).
3 - 3 8 Change 1