TM 9-2350-277-20-5
REPLACE M8A3 NBC HOSES AND BRACKETS (M1059A3 ONLY) — Continued
0787 00
INSTALLATION
1.
Install driver’s station hose (1) on air purifier (2) and tighten clamp (3).
2.
Route driver’s station hose (1) to driver’s station. Secure to side of hull with three clips (4), new lockwashers (5), and
screws (6).
3.
Attach support (7), two screws (8), and new lockwashers (9) to side plate.
4.
Install connector (10), two new lockwashers (11), and screws (12) to support (7).
5.
Insert end of driver’s station hose (1) into connector (10).
6.
Install commander’s station hose (13) on air purifier (2) and tighten clamp (14).
7.
Secure commander’s station hose (13), two clamps (15), screws (16), and new lockwashers (17) to transverse beam and
top plate.
8.
Attach commander’s station hose (13), two clips (18), screws (19), and new lockwashers (20) to top plate in front of
commander’s hatch.
9.
Install support (21), two screws (22), four washers (23), and two new locknuts (24) to bulkhead above engine access door.
10. Install connector (25), screw (26), and new lockwasher (27) on support (21).
11. Install commander’s station hose (13) on connector (25).
0787 00-4
