TM 9-2350-277-20-5
REPLACE M8A3 NBC HOSES AND BRACKETS (M1059A3 ONLY) Continued
0787 00
7.
Remove rubber cap (16) from air purifier (15).
8.
Remove commanders station hose (1) from connector (2).
9.
Remove screw (3), lockwasher (4), and connector (2) from support (5). Discard lockwasher.
10. Remove two screws (6), four washers (7), two locknuts (8), and support (5) from bulkhead above engine access door.
Discard locknuts.
11. Remove commanders station hose (1), two screws (9), lockwashers (10), and clips (11) from top plate in front of
commanders hatch. Discard lockwashers.
12. Remove two screws (12), lockwashers (13), clamps (14) and commanders station hose (1) from top plate and transverse
beam. Remove hose from clamps. Discard lockwashers.
13. Loosen clamp (15) and remove commanders station hose (1) from air purifier (16).
14. Disconnect drivers station hose (17) from connector (18).
15. Remove screw (19), lockwasher (20), and connector (18) from support (21). Discard lockwasher.
16. Remove two screws (22), lockwashers (23), and support (21) from side plate. Discard lockwashers.
17. Remove drivers station hose (17), three screws (24), lockwashers (25), and clips (26) from side plate. Discard
lockwashers.
18. Loosen clamp (27) and remove drivers station hose (17) from air purifier (16).
0787 00-2