TM 9-2350-277-20-5
REPLACE FRONT ARMOR (M113A3 ONLY) — Continued
0749 00
DISASSEMBLY
WARNING
Armor plates are heavy. Be sure to support plate properly to avoid injury to personnel.
NOTE
If kit 57K0467 is installed, do WP 0749 00.
If kit 57K0429 is installed, do Steps 10 - 18.
1.
Remove screw (1) with jam nut (2) and washer (3) from backing plate (4) and power plant door armor plate (5).
2.
Remove jam nut (2) from screw (1).
3.
Remove two screws (6), lockwashers (7), washers (8), backing plate (4), and latch stop (9), from power plant door armor
plate (5). Discard lockwashers.
4.
Remove two screws (10), lockwashers (11), washers (12), backing plate (13), and trim vane hinge (14) from front right
armor plate (15). Discard lockwashers.
5.
Remove four screws (16), washers (17)(18), locknuts (19) and bracket (20) from front right armor plate (15). Discard
locknuts.
6.
Remove four screws (21), washers (22)(23), locknuts (24), and bracket (25) from front left armor plate (26). Discard
locknuts.
7.
Remove four screws (27), washers (28)(29), locknuts (30), and two track shoe brackets (31) from front left armor plate
(26). Discard locknuts.
8.
Remove two screws (32), washers (33), backing plate (34), and trim vane strike (35) from front left armor plate (26).
0749 00-5
