INSTALLATION - TM-9-2350-277-20-4

REPLACE LAUNCH TUBE STOWAGE BRACKET (M901A3 ONLY)

REPLACE TRAVERSING UNIT MOUNT AND SPACER (M901A3 ONLY)

TM-9-2350-277-20-4 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
613

TM 9-2350-277-20-4 REPLACE LAUNCH TUBE STOWAGE BRACKET (M901A3 ONLY) — Continued 0590 00 INSTALLATION 1. Install plate (19) on hull. Secure with two spacers (23), spacers (22), four new lockwashers (21), and screws (20). 2. Install lower support (18) on plate (19). Secure with four washers (17), screws (16), and pin (15). 3. Install bracket (10) on hull (14). Secure with two washers (13), new lockwashers (12), and screws (11). 4. Install upper support (4) on bracket (10). Secure with four washers (9), washers (7), new lockwashers (6), screws (8), and nuts (5). 5. Install strap (3) on upper support (4). Secure with headed straight pin (2) and new cotter pin (1). FOLLOW-THROUGH STEPS 1. Install launch tube (see your -10). END OF TASK 0590 00-2

Privacy Statement
Press Release
Contact