REPLACE TRIPOD STOWAGE BRACKETS (M901A3 ONLY)

TM-9-2350-277-20-4 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
616

TM 9-2350-277-20-4 REPLACE TRIPOD STOWAGE BRACKETS (M901A3 ONLY) 0592 00 THIS WORK PACKAGE COVERS: Removal (page 0592 00-1). Installation (page 0592 00-3). INITIAL SETUP: Maintenance Level Unit Tools and Special Tools General Mechanic’s Tool Kit (WP 0926 00, Item 65) Torque Wrench (WP 0926 00, Item 83) Torque Wrench (WP 0926 00, Item 85) Materials/Parts Cotter pin Cotter pin (2) Cotter pin (2) Locknut (2) Lockwasher (3) Lockwasher (2) Personnel Required Unit Mechanic References See your -10 Equipment Condition Engine stopped (see your -10) Carrier blocked (see your -10) Ramp lowered (see your -10) Tripod removed (see your -10) REMOVAL 1. Remove cotter pin (1), headed straight pin (2), and restraining strap (3) from tripod plate strap (4). 2. Remove two screws (5), washers (6), locknuts (7), and support shims (8) from lower support bracket (9) and support channel (10). Remove support bracket from support channel. Discard locknuts. 3. Remove two screws (11), washers (12), six washers (13), and tripod plate strap (4) from lower support bracket (9). 4. Remove three screws (14), lockwashers (15), and spacers (16) from lower support bracket (9). Remove lower support bracket from carrier. Discard lockwashers. 5. Remove two screws (17) and washers (18) from support channel (10) and floorboard. Remove support channel and support cushion (19) from under floorboard. 0592 00-1

Privacy Statement
Press Release
Contact