TM 9-2350-277-20-4
REPLACE TRACK TENSION ADJUSTER AND MOUNT — Continued
0419 00
INSTALLATION
NOTE
Grease fitting and relief valve of track tension adjuster should be toward front of carrier. Make
sure grease fitting is pointing out.
1.
Install relief valve (1) and grease fitting (2) in track tension adjuster (3).
2.
Place track adjuster (3) on shaft of idler arm.
3.
Install mount (4) in front of adjuster (3). Raise adjuster and mount. Align hole in mount with hole in hull for screw (5).
4.
Install screw (5) in mount (4). Tighten until snug.
0419 00-3
