TM 9-2350-277-20-4
REPLACE DRIVE SPROCKET AND CARRIER ASSEMBLY Continued
0420 00
INSTALLATION
1.
Place two drive sprockets (1) and carrier assembly (3) on final drive (4). Secure with 10 new self-locking screws (2).
Tighten screws to 170-190 lb-ft (231-258 N.m) torque.
2.
Place track on drive sprockets (1).
FOLLOW-THROUGH STEPS
1.
Connect track and adjust tension (see your -10).
2.
Install track shroud and covers (WP 0438 00).
3.
Unblock carrier (see your -10).
4.
Road test carrier to check that drive sprocket and carrier assembly are installed right (WP 0155 00).
END OF TASK
0420 00-2