TM 9-2350-277-20-4
REPAIR DRIVERS HATCH (M901A3 AND M981A3 ONLY) Continued
0538 00
7.
Install yoke (20), spacer (21), spacer (22), shield (23), and 17 springs (24).
8.
Move yoke (20) to open position.
9.
Install cap (25), two screws (26), washers (27), and new locknuts (28).
10. TIGHTEN TWO NUTS (28) TO 48-70 LB-FT (65-95 N m) TORQUE.
0538 00-16