TM 9-2350-277-20-4REPAIR DRIVER’S HATCH (M901A3 AND M981A3 ONLY) — Continued 0538 00b. Press new seal (1) into hatch (2) groove and apply pressure with a roller or other suitable tool to seat seal.3. Replace rubber stop. See Step 4.a. Place hatch (2) in closed position.b. Remove stop (3) from yoke (4).c. Remove rubber stop (5) from stop (3). Discard rubber stop. Clean to bare metal.d. Apply clear adhesive sealant evenly to mating surface of stop (3). Allow to dry at least 30 minutes. Apply secondcoat only when surface is dry to touch.e. Apply second coat of sealant evenly to mating surface of stop (3). Allow second coat of sealant to dry at least 20minutes. Surface must be tacky to touch.f. Press new rubber stop (5) to stop (3), and apply pressure with a roller or other functional tool.g. Install stop (3) on yoke (4) (Step 11).0538 00-11
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
