TM 9-2350-277-20-4REPLACE RAMP LOCK LEVER AND CABLE (M577A3 AND M1068A3 ONLY) —Continued0525 0012. Remove two nuts (10) and six clamps (7) from cable (3).CLEANINGCLEANING, INSPECTION, AND REPAIR1. Check cable. Replace parts that are cut, worn, binding, or have stripped threads.2. Check ball joints. Replace joints that are binding or that have stripped threads.3. Check ramp lock lever supports and arm. Remove scratches and grooves with fine sandpaper. Replace parts that areworn, cracked, or pitted.INSTALLATION1. Install six clamps (7) and four nuts (10) on cable (3).2. Install cable (3) in two hull retainers. Secure with four nuts (10).3. Align five clamps (7) with overhead rail. Secure with five screws (9) and nuts (8).0525 00-3
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
