TM 9-2350-277-20-4
REPLACE RAMP LOCK LEVER AND CABLE (M577A3 AND M1068A3 ONLY) —
Continued
0525 00
6.
Loosen two locknuts (17). Remove two clevises (3) and locknuts (17) from two joints (18). Discard locknuts.
7.
Loosen two locknuts (1). Remove two joints (2) and locknuts (1) from cable (3). Discard locknuts.
8.
Remove two seal assemblies (4) from cable (3).
9.
Remove screw (5), lockwasher (6), and clamp (7) from forward bulkhead weldnut. Discard lockwasher.
10. Remove five nuts (8), screws (9), and clamps (7) from overhead rail.
11. Remove four nuts (10) on cable (3) and on seal assemblies (4) from two hull retainers.
0525 00-2
