TM 9-2350-277-20-4
REPLACE PUSH-PULL CONTROL ASSEMBLY, BRACKET, LINKS, AND PINS
(CABLE-ACTIVATED LOCK) — Continued
0429 00
4.
Place transmission controller in R position.
5.
Install spring (1) on locking pin (2).
6.
Install bracket (3) in steering wheel housing (4). Secure with two washers (5) and screws (6). Do not tighten.
7.
Turn steering wheel (7) all the way to one side. Slide bracket (3) to the steering wheel (7) until locking pin (2) is flush
with the housing (4).
0429 00-13
