REPLACE GLOW PLUG POWER HARNESS

INSTALLATION-cont. - TM-9-2350-277-20-2_499

TM-9-2350-277-20-2 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 Carrier Command Post Light Tracked M577A3 2350-01-369-6085 Manual
Page Navigation
433

TM 9-2350-277-20-2 REPLACE GLOW PLUG POWER HARNESS 0211 00 THIS WORK PACKAGE COVERS: Removal (page 0211 00-1). Installation (page 0211 00-2). INITIAL SETUP: Maintenance Level Unit Tools and Special Tools General Mechanic’s Tool Kit (WP 0926 00, Item 65) Materials/Parts Lockwasher (3) Tie straps (as required) Personnel Required Unit Mechanic References See your -10 Equipment Condition Engine stopped (see your -10) Carrier blocked (see your -10) Driver’s power plant access panel removed (see your -10) Rear power plant access panel removed (see your -10) Battery ground strap disconnected (WP 0337 00), (WP 0338 00), or (WP 0339 00) REMOVAL 1. Remove nut (1), lockwasher (2), and red double lead (3) from battery terminal (4) on solenoid (5). Do not remove other leads. Reinstall nut on battery terminal. Discard lockwasher. 2. Remove nut (6), lockwasher (7), and orange switch lead (8), from switch terminal (9) on solenoid (5). Do not remove other leads. Reinstall nut on switch terminal. Discard lockwasher. 3. Remove nut (10), lockwasher (11), and blue ground lead (12) from ground terminal (13) on solenoid (5). Do not remove other leads. Reinstall nut on ground terminal. Discard lockwasher. 0211 00-1

Privacy Statement
Press Release
Contact