REPLACE GLOW PLUG CONTROLLER MOUNTING BRACKET

FOLLOW-THROUGH STEPS - TM-9-2350-277-20-2_503

TM-9-2350-277-20-2 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 Carrier Command Post Light Tracked M577A3 2350-01-369-6085 Manual
Page Navigation
436

TM 9-2350-277-20-2 REPLACE GLOW PLUG CONTROLLER MOUNTING BRACKET 0212 00 THIS WORK PACKAGE COVERS: Removal (page 0212 00-1). Installation (page 0212 00-2). INITIAL SETUP: Maintenance Level Unit Tools and Special Tools General Mechanic’s Tool Kit (WP 0926 00, Item 65) Torque wrench (WP 0926 00, Item 81) Torque wrench (WP 0926 00, Item 82) Materials/Parts Lockwasher (4) Lockwasher (2) Personnel Required Unit Mechanic References See your -10 Equipment Condition Engine stopped (see your -10) Carrier blocked (see your -10) Rear power plant access panel removed (see your -10) Battery ground strap disconnected (WP 0337 00), (WP 0338 00), or (WP 0339 00) REMOVAL 1. Remove two bolts (1), lockwashers (2), nuts (3), four washers (4), and glow plug controller (5) from mounting bracket (6) on front of engine. Discard lockwashers. 2. Remove two short screws (7), lockwashers (8), and washers (9) from front of mounting bracket (6). 3. Remove two long screws (10), lockwashers (11), washers (12), spacers (13), and mounting bracket (6) from engine. Discard lockwashers. 0212 00-1

Privacy Statement
Press Release
Contact