FOLLOW-THROUGH STEPS - TM-9-2350-277-20-2

REPLACE GLOW PLUG CONTROLLER MOUNTING BRACKET

TM-9-2350-277-20-2 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 Carrier Command Post Light Tracked M577A3 2350-01-369-6085 Manual
Page Navigation
435

TM 9-2350-277-20-2 REPLACE GLOW PLUG POWER HARNESS — Continued 0211 00 2. Connect glow plug power harness (1) on left side (4) of glow plug controller (5). 3. Remove nut (6) from ground terminal (7). Install blue ground lead (8), new lockwasher (9), and nut on ground terminal. 4. Remove nut (10) from switch terminal (11). Install orange switch lead (12), new lockwasher (13), and nut on switch terminal. 5. Remove nut (14) from battery terminal (15). Install red double lead (16), new lockwasher (17), and nut on battery terminal. FOLLOW-THROUGH STEPS 1. Connect battery ground strap (WP 0337 00), (WP 0338 00), or (WP 0339 00). 2. Install power plant access panel (see your -10). 3. Install driver’s power plant access panel (see your -10). END OF TASK 0211 00-3/4 blank

Privacy Statement
Press Release
Contact