TRANSMISSION, ASSEMBLY AND TRANSFER AND DRIVE CONTROL ASSEMBLIES

TRANSMISSION, TRANSFER AND DRIVE CONTROL ASSEMBLIES - TM-9-2350-267-20_774

TM-9-2350-267-20 Carrier Ammunition Tracked M992 (2350-01-110-4660) Manual
Page Navigation
712

TRANSMISSION, ASSEMBLY AND TRANSFER AND DRIVE CONTROL ASSEMBLIES — OIL FILTER: REMOVAL, DISASSEMBLY, INSTALLATION REMOVAL A Remove front slope plate (p 3-5 thru 3-8). B Remove three screws and three lockwashers (1). C Remove oil filter (2) by lifting up. NOTE If filter cannot be removed, insert two screws (1) into puller screw holes (3) and lift out. DISASSEMBLY A Remove nut (1) from oil filter (2). B Separate filter element (2) and preformed packing (3) from rod assembly (4). C Discard filter element (2) and preformed packing (3). ASSEMBLY A Replace filter element (2) and preformed packing (3). B Assemble oil filter in reverse order of disassembly. INSTALLATION Install oil filter in reverse order of removal. 7-9 TA310099 TM 9-2350-267-20

Privacy Statement
Press Release
Contact