RIGHT TAILLAMP ASSEMBLY: REMOVAL, DISASSEMBLY, ASSEMBLY AND INSTALLATION (CONTINUED)
A
B
c
D
E
ASSEMBLY
Loosen six screws (10) with six retaining rings (11).
Separate door (12) and gasket (13) from body (14). Discard
gasket.
Push in two lamps (15), turn counterclockwise and remove.
Remove two screws (16) and two lockwashers (17). Discard
lockwashers.
Remove three screws (18) and lamp holder (19) from body (14).
A Position new lamp holder (19) in body (14) and secure with three
screws (18).
B Install two screws (16) and two new lockwashers (17).
C
Install lamps (15) and turn clockwise until seated.
D Install door (12) and new gasket (13) with six screws (10) and
six retaining rings (11).
INSTALLATION
A Install leads (4) through grommet (9) and hull.
DISASSEMBLY
B Install taillight assembly (8) with two screws (5), two flat
washers (6), and two new lockwashers (7).
NOTE
C Connect two electrical leads (4).
Taillight does not have to be removed to service
lamps.
D Install four spacers (2), cover plate (3) and four screws (1).
TA57156
6-26.1
Change 2
TM 9-2350-267-20
