LEFT TAILLAMP ASSEMBLY: REMOVAL, DISASSEMBLY, ASSEMBLY AND INSTALLATION (CONTINUED)
DISASSEMBLY
A
B
C
D
E
NOTE
Taillight does not have to be removed to service
lamps.
Loosen six screws (10) with retaining rings (11).
Remove door (12) and gasket (13).
Push in two lamps (14 and 15).
counterclockwise and remove.
Remove two screws (16) and two
lockwashers.
Discard gasket.
Turn lamps (14
lockwashers (17).
and 15)
Discard
Remove three screws (18) and lamp holder (19) from body (20).
ASSEMBLY
A
B
C
D
Position new lamp holder (19) in body (20). Secure lamp holder
(19) with three screws (18).
Install two screws (16) and two new lockwashers (17).
Position two lamps (14 and 15) on lamp holder (19). Push in on
lamps (14 and 15) and turn clockwise until seated.
Position door (12) and new gasket (13) with six screws (10) and
six retaining rings (11).
TA57160
6-36.3/(6-36.4 blank)
Change 2
TM 9-2350-267-20