6-36
Change 2
TM 9-2350-267-20
RIGHT TAILLAMP ASSEMBLY: REMOVAL, DISASSEMBLY, ASSEMBLY AND INSTALLATION
INITIAL SETUP
Equipment Condition:
Battery ground cables disconnected (6-44).
MASTER Switch OFF.
Personnel Required:
Two
REMOVAL
NOTE
Be careful that spacers do not fall during removal.
A
Remove four screws (1), four spacers (2) and cover plate (3) from
vehicle crew compartment.
B
Disconnect two electrical leads (4).
C Remove two screws (5), two flat washers (6) and two
lockwashers (7). Discard lockwashers.
D Remove taillight assembly (8), grommet (9) and electrical leads
(4) from hull.
TA57155