TA57159
6-36.2
Change 2
TM 9-2350-267-20
LEFT TAILLAMP ASSEMBLY, REMOVAL, DISASSEMBLE, REPAIR, ASSEMBLY AND INSTALLATION
INITIAL SETUP
Personnel Required:
Two
Equipment Condition:
Left canister guard removed (p 11-16).
MASTER switch OFF.
Battery ground cables disconnected (6-44).
NOTE
Be careful that spacers do not fall during removal.
A
B
C
D
Remove five screws (1), five spacers (2), and cover plate (3).
Disconnect three electrical leads (4).
Remove two screws (5), two flat washers (6) and two
lockwashers (7). Discard lockwashers.
Remove taillight assembly (8), grommet (9) and electrical leads
(4).