HEADLIGHT ASSEMBLY: DISASSEMBLY AND ASSEMBLY (CONTINUED)
ASSEMBLY
A
Apply dry film lubricant (item 33, Appx D) between gasket (27)
NOTE
and shield (29).
Make sure infrared lens is installed on left side
B
Assemble light shield assembly (22) by installing lens (28), two
looking forward.
gaskets (27), retainer (26), two new lockwashers (25) and two
screws (24) in shield (29).
G Install two gaskets (11), service headlight lens (10), infrared lens
(9) and two retainers (8) on cover ( 19) with six new lockwashers
C Coat gasket (23) with adhesive (item 2, Appx D) and install in
(7) and six screws (6).
shield assembly (22).
H Coat seal (5) with adhesive (item 2, Appx D) and install in cover
D
Install light shield assembly (22) with three screws (20) and
(19).
three new lockwashers (21).
I
Install cover assembly (3) on body (4) with four screws (1) and
E
Coat gasket (18) with sealing compound (item 55, Appx D) and
four new lockwashers (2).
install in cover (19).
F
Install lens (17), filter (16), gasket (15) and retainer (14) on cover
(19) with two new lockwashers (13) and two screws (12).
TA312797
6-33
Change 1
TM 9-2350-267-20
