HEADLIGHT ASSEMBLY: DISASSEMBLY AND ASSEMBLY
INITIAL SETUP
Materials/Parts:
Dry film lubricant (item 33, Appx D)
Adhesive (item 2, Appx D)
Sealing compound (item 55, Appx D)
DISASSEMBLY
A
Remove four screws (1), four lockwashers (2) and cover assembly
(3) from body (4). Discard lockwashers.
B
Disassemble cover assembly (3) by removing seal (5), six screws
(6), six lockwashers (7), two retainers (8), infrared lens (9), ser-
vice headlight lens (10), two gaskets (11 ), two screws (12), two
lockwashers (13), retainer (14), gasket (15), filter (16), lens (17)
and gasket (18) from cover (19). Discard lockwashers. Discard
gaskets and seal if damaged.
C Remove three screws (20), three lockwashers (21) and light shield
assembly (22). Discard lockwashers.
D Remove gasket (23). Discard if damaged.
I
E
Disassemble light shield assembly (22) by removing two screws
(24), two lockwashers (25), retainer (26), two gaskets (27) and
lens (28) from shield (29). Discard lockwashers. Discard gaskets
if damaged.
TA312795
6-32.1
Change 1
TM 9-2350-267-20
