TA312794
6-32
Change 1
HEADLIGHT SEALED-BEAM AND INCANDESCENT LAMPS: REMOVAL AND INSTALLATION (CONTINUED)
TM 9-2350-267-20
INSTALLATION
A Install two gaskets (10) on two sealed-beam lamps (5)
B
Coat new seal (9) with adhesive (item 2, Appx D) and install
in cover (3).
C
Install blackout drive reflector (8).
D
Install blackout lamps (7) by pushing in and turning clockwise.
E
Connect two electrical connectors (6) to sealed-beam lamps (5).
F
Push two sealed-beam lamps (5) into body (4).
G Install cover (3) on headlight body (4) with four screws (1) and
four new lockwashers (2).