OUTER AND INNER GUARDS: REMOVAL AND INSTALLATION

STACKER ASSEMBLY REMOVAL AND INSTALLATION (CONTINUED) - TM-9-2350-267-20_1117

TM-9-2350-267-20 Carrier Ammunition Tracked M992 (2350-01-110-4660) Manual
Page Navigation
1030

OUTER AND INNER GUARDS: REMOVAL AND INSTALLATION REMOVAL A Remove two screws (1), two lockwashers (2) and two flat washers (3) from bottom of inner guard (4). B Lower stacker tray fully (TM 9-2350-267-10). C Disconnect electrical plug (5) from stacker control switch (6). D Remove screw (7), two flat washers (8 and 9), lockwasher (10) and nut (11) that secure inner guard (4) and outer guard (12). E Remove screw (13), lockwasher (14) and flat washer (15) that secure inner guard (4) to vertical stacker support (16). F Remove inner guard (4) from stacker assembly. G Remove two screws (17), two lockwashers (18) and two flat washers (19) from bottom of outer guard (12). H Remove screw (20), lockwasher (21) and flat washer (22) that secures outer guard (12) to support bracket. I Remove outer guard (12) from stacker assembly. INSTALLATION Reverse order of removal procedures. TA310231 12-31 TM 9-2350-267-20

Privacy Statement
Press Release
Contact