TM 9-2350-267-10
OPERATING THE APU - Continued
4.
5.
6.
7.
8.
Shut down vehicle main engine. Turn MASTER switch OFF in both vehcles.
Attach slave cable (3) to slave receptacle (4) on both vehicles.
Turn your vehicle’s MASTER switch ON and start APU (p 2-116)
Allow APU to warm up for three minutes, then turn ON the APU GENerator
switch (5).
Turn ON the MASTER switch in
NOTE
You may start your vehi-
cle’s main engine to in-
supported vehicle to charge batteries.
crease power generation.
2-124
