Home
Download PDF
Order CD-ROM
Order in Print
REPAIR TENT INTERFACE PANEL BOX ASSEMBLY A5 (M1068 ONLY) - TM-9-2350-261-34_518
WIRING DIAGRAM FOR TENT INTERFACE PANEL BOX ASSEMBLY A5 (M1068 ONLY)
TM-9-2350-261-34 Carrier Personnel Full Tracked Armored M113A2 2350-01-068-4077 Carrier Command Post Light Tracked M577A2 2350-01-068-4089 Manual
Page Navigation
489
490
491
492
493
494
495
496
497
498
499
TM 9-2350-261-34
6. Disconnect three lead terminals (1) from
11. Remove two jamnuts (13) and connectors J9
connector J11 (2).
and J10 (14) from box (12).
7. Disconnect three terminals (1) from
connector J12 (3).
12. Remove two jamnuts (15) and connectors
J113 and J114 (16) from faceplate (9).
8. Disconnect three lead terminals (1) from
connector J13 (4).
9. Remove 12 screws (5), locknuts (6), three
dust caps (7), connectors (2, 3, and 4), and
gaskets (8) from faceplate (9). Discard
locknuts.
13. Remove four screws (5), locknuts (6), con-
nector J22 (17), gasket (18), and dust
cap (19) from faceplate (9). Discard
locknuts.
14. Remove four binding posts (20) from
faceplate (9).
10. Remove four screws (5), locknuts (6), J7
connector (10), and gasket (11) from
box (12). Discard locknuts.
15. Remove two locknuts (21), screws (22), and
caps (23) from faceplate (9). Discard lock-
nuts.
16. Remove six nuts (24), screws (25),
washers (26), two catch assemblies (27),
and pads (28) from box (12).
21.1-48
Change 4
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business