TM 9-2350-261-34
INSTALL
8.
9.
10.
11.
12.
13.
14.
If fixed resistor (1) is to be replaced, grind
or cut sleeve off of fuel tube (2). Discard
sleeve.
Install fixed resistor (1) and new sleeve (3)
on fuel tube (2).
Secure electrical lead (4) to fixed resistor (1)
with screw (5) and nut (6).
Secure fixed resistor (1) to heater (7) with
nut (8).
Secure fuel tube (2), flange (9), and tapping
plate (10) to heater (7) with two screws
screws (11).
Install end cover (12) on heater (7). Tighten
four nuts (13).
Secure fuel control valve bracket (14) to
heater (7) with two screws (15).
FOLLOW-THROUGH STEPS
1. Install fuel control valve on coolant heater
2. Install engine coolant heater in carrier
(page 14-48).
(see your -20).
END OF TASK
14-56
