TM 9-2350-261-34 42.43.44.45.46.Remove five screws (1) from weldnuts (2)(M113A2).Secure personnel heater fuel hose (3) toeight weldnuts (2) with five screws, threekit screws (1), and eight clamps (4)(M113A2).Remove one screw (1) from one weldnut (2)(M741A1).Secure personnel heater fuel hose (3) tothree weldnuts (2) with one screw, two kitscrews (1), and three clamps (4) (M741A1).Secure personnel heater fuel hose (3) tohydraulic tube (5) with strap (6) (M741A1).goggles andW A R N I NGDrycleaningsolventP - D - 6 8 0 istoxicandflammable. Always use inan open area with good airflow, away from sparks,h e a t , o r f l a m e s . W e argloves.Do not breathevapors. Avoid contact with skin, eyes, andclothes. If you get dizzy while usingsolvent, breathe fresh air and get medicalhelp. If solvent gets on hands, wash them.If solvent gets in eyes, flush eyes withfresh water and get medical helpimmediately.Keep fireextinguishernearby.47.48.Clean external threads of fittings with drycleaning solvent.Apply a thin, even coat of primer and thensealing compound to cleaned external pipethreads of fittings. Do not apply primer orsealing compound beyond small end ofthreads.11-8
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business