TM 9-2350-261-34
REPLACE FRONT SPLASH GUARDS OR REAR FENDERS ALL
EXCEPT M741A1)
INITIAL SETUP
Tools:
Metal Worker’s Tool Kit (Item 61, App B)
Adapter (Item 2, App B)
Arc Welding Machine (Item 102, App B)
Electrical Disc Sander (Item 77, App B)
Industrial Goggles (Item 37, App B)
Trailer Mounted Welding Shop
(Item 96, App B)
Welder’s Gloves (Item 36, App B)
Welder’s Helmet (Item 42, App B)
Materials/Parts:
Welding electrode (Item 83, App C)
Front splash guard or rear fender
Personnel Required:
Metal Worker 44B10
References:
see your -10
see your -20
TM 9-237
TM 43-0139
Equipment Conditions:
Engine stopped/shutdown (see your –10)
Track shroud and covers on damaged side
removed (see your -20)
Track disconnected (see your -10)
Battery ground disconnected (see your –20)
REMOVE
1.
NOTE
If replacing front splash guard, remove
drive sprocket from carrier (see your -20).
If replacing rear fender, remove idler
wheel (see your -20).
Remove and discard damaged splash guard or
damaged fender from carrier.
WARNING
dust can cause injury. Wear
goggles
.
2. Use a hand grinder to
and gloves.
grind area smooth.
INSTALL
3. Weld new splash guard or
shown in illustrations and
TM 9-237.
new fender as
in accordance with
LEFT FRONT SPLASH GUARD
WELDMENT
NOTE
Weld left front splash guard as shown.
Right side is the opposite and is welded
accordingly.
8-36
Metal chips and grinding
