TM 9-2350-261-34
43.
44.
Secure engine wiring harness (1) to oil inlet
hose (2) with two new tiedown straps (3).
Remove transmission from blocks and place
46.
on power plant stand (4). Use sling (5) and
suitable lifting device.
47.
45. Connect
with 10
washers
and two
transmission to engine and secure
new self-locking bolts (6), 10
(7), screw (8), three washers (9),
new locknuts (10). Tighten screw
with locknut to 38-41 ft–1b (52-56 N•m)
torque. Tighten oil outlet hose. Use
adjustable wrench.
48.
49.
Connect variable speed drive clutch supply
hose (11) to elbow (12) on transmission
filter case (13).
Connect variable speed drive clutch return
hose (14) to elbow (15) on end cover at rear
of transmission.
GO TO NEXT PAGE
Install new preformed packing (16),
transmission drain adapter (17), and nut
(18) on transmission.
Slide drain tube (19) and secure to
transmission adapter (17). Tighten drain
tube mount clamp (20).
8-9
