TM 9-2350-261-34
50.
51.
Remove pipe plug (1) from tv modulator
pressure port. Apply sealing compound to all
male threads before installation. Install pipe
plug in elbow (2). Install elbow in
transmission in the 1:00 to 2:00 oclock
position.
Install TV modulator (3) on transmission.
Secure with clamp (4) and new screw (5).
52.
53.
Install transmission oil inlet hose (6) on oil
cooler outlet elbow (7).
Mount inlet hose clamp bracket (8) on
transmission with screw (9) and
washer (10).
54.
55.
56.
Connect circuit 34 lead (11) to engine oil
low pressure switch (12).
Connect transmission inlet hose (6) to
elbow (13).
Secure inlet hose (6) to bracket (8) with
clamp (14), screw (15), two washers (16),
and new locknut {17). Tighten screw to
27-32 lb-ft (36-44 Nm) torque.
FOLLOW-THROUGH STEPS
1. Install ramp hydraulic pump (See your -20).
3.
2. Install dipstick and filler tube (see your -20).
4.
Install transmission oil sampling valve
(see your -20).
Replace transmission oil (see your -12).
END OF TASK
8-10