TM
72.
73.
74.
9-2350-261-34
Install harness (1) through driver’s
compartment bulkhead opening. Connect con-
nector (2) to dimmer switch (3).
Secure cover (4) to bulkhead (5) with four
Screws (6).
Install harness (1) on two weldnuts
Secure with two clamps (8), new
lockwashers (9), and screws ( 10).
(7).
75.
76.
Install harness (1) on three cradles (11).
Secure with three cradle clips (12).
Connect circuits 75A and 75B leads (13 and
14) to stop light switch (15) inside power
plant compartment.
77. Connect circuit 452 lead (16) to front bilge
pump (17).
