32.
33.
34.
Disconnect connector (1) from dimmer
switch (2).
Remove four screws (3) and cover (4) from
four pressnuts (5) in drivers compartment
bulkhead.
Remove two screws (6), lock washers (7),
and clamps (8) that secure harness (9) to
two weldnuts ( 10).
35.
36.
37.
TM9-2350-261-34
Pull harness (9) through bulkhead into driv-
ers compartment.
Disconnect circuit 74 lead ( 11) and circuit
74A lead (12) from range selector
leads (13).
Remove cradle clip
from cradle (15),
(14) and harness (9)
GO TO NEXT PAGE
6-23