TM9-2350-261-34
6. Remove three screws (1) and key washers (2)
that secure housing (3) to support (4).
Discard key washers.
NOTE
Refer to TM9-214 for bearing mainte-
nance.
7. Remove housing (3), bearing (5), and drive
shaft (6) from gearbox (7) and support (4).
8. Loosen setscrew (8). Remove collar (9) and
drive shaft (6) from housing (3).
9. Remove bearing (5) from housing (3).
10. Remove lockring (10) and packing (11) from
drive shaft (6). Use retaining ring pliers.
Discard packing.
11. Remove four screws (12), nuts (13), eight
washers (14), and gearbox (7) from
support (4).
NOTE
Refer to TM 9-2520-238-34 for the disas-
sembly of gearbox.
GO TO NEXT PAGE
5-7
