TM 9-2350-261-34
R E P A I R F AN
DESCRIPTION
This task covers:
Remove (page 5-6).
Install (page 5-8).
INITIAL SETUP
Tools:
General Mechanics Tool Kit (Item 35, App B)
Mechanical Puller Kit (Item 59, App B)
Torque Wrench (Item 112, App B)
Torque Wrench (Item 117, App B)
Retaining Ring Pliers (Item 64, App B)
Materials/Parts:
Sealing compound (Item 71, App C)
Flat washer (3)
Key washer (3)
Lockwasher (4)
Preformed packing
Self-locking nut (8)
Personnel Required:
Track Vehicle Repairer 63H10
References
See your -20
TM 9-214
TM 9-2520-238-34
Equipment Conditions:
Fan assembly removed from carrier
(see your 20)
REMOVE
3.
1.
2.
Remove four screws (1), lockwashers (2), flat
washers (3), and cover (4) from fan
housing (5). Discard lockwashers.
4.
Remove six screws (6), two screws (7), 16
flat washers (8), eight locknuts (9), and fan
5.
housing (5) from support (10). Discard
locknuts.
Remove nut (11 ) and washer (12) that secure
fan (13) to shaft (14) on gear box (15).
Discard washer.
Use puller to remove fan (13) from
gearbox (15).
Remove key (16) from shaft (14).
5-6