TM9-2350-261-3430.31.32.33.Disconnect air box heater fuel hose (1) fromtee (2).Disconnect elbow (3) from tee (2).Remove nut (4), screw (5), and governorcontrol link (6) from throttle arm (7).Remove two screws (8) and gage (9) fromgovernor (10).34.34.134.234.335.36.37.GO TO NEXT PAGERemove locknut (11) and screw (12) frombracket assembly (13). Use cross-tipscrewdriver. Discard locknut.Before removing screw (14), raise innertransfer shaft (15) high enough to tilt theouter transfer shaft (16).Remove screw (14) and lockwasher (17)from bracket assembly (13). Discardlockwasher.Remove two screws (18), lockwashers (19),nuts (20), and bracket assembly (13) frompower plant. Discard lockwashers.Remove screw (21) and clamp (22) fromdifferential oil hose (23).Disconnect and remove two differential oilhoses (23, 24) from elbows (25, 26).Remove two elbows (25, 26) from engine oilcooler housing.C h a n g e 1 3 - 3 7
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business