TM 9-2350-261-20-4
REPLACE/REPAIR INVERTER AC CABLE (W5) (M1068 ONLY) -- Continued
0741 00
REMOVAL
NOTE
Tag all cables and leads before removal.
1.
Disconnect cable W5 P6 (1) from power control box A1 jack J27 (2).
2.
Remove faceplate (3) on inverter housing A2 (4) by removing ten screws (5) and lockwashers (6). Discard lockwashers.
3.
Remove opposite end of W5 by disconnecting five terminals E1 through E5 (7) from inverter terminal block TB2 (8).
Remove five screws (9).
4.
Remove harness W5 from inverter housing A2 (4) by pulling the harness through the back of housing. Remove harness
from carrier.
