TM9-2350-261-20-2I N S T A L L10.11.12.13.14.15.16.17.18.Apply a thin even coat of sealing compoundto cleaned external threads of all fittings be-fore installation.Install elbow (1) in oil falter head (2).Install bushing (3) in head (2).Install adapter (4) in bushing (3).Install bracket (5) on head (2). Secure withtwo screws (6) and new lockwashers (7).Install filter head (2) with bracket (5) on engine. Secure with two screws (8), washers(9), and new locknuts (10).Connect outlet hose (11) to elbow (1). UseConnect inlet hose (12) to adapter (4). Install drain plug (13) in oil falter (14).W A R N I N Gadjustable wrench.ous and can kill y&. DOCarbon monoxide is poison-NOT idle engine with powerplant panel off unless thereis VERY GOOD AIR FLOW.19. Check differential oil level(see your LO). Add oil as needed.20. Start engine (see your –10). Check for leaks.IIIF O L L O W - T H R O U G H S T E P S1. Engine stopped/shutdown (see your -10).2. Install driver’s power plant access panel(page 24-25).END OF TASK\21-7I
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business